The SmartMyTracks is a SONY SmartWatch application for Google My Tracks
The SmartMyTracks is a application for "SONY SmartWatch" with Google My Tracks works on your terminal. This application can control to start & pause & stop record tracks and mark waypoints of Google My Tracks on your terminal via SmartWatch.
[NOTE]
To use SmartMyTracks you need to check "Menu>More>Settings>Sharing>Allow access" in My Tracks's menu on your terminal.
Also don't use storage setting to "Move to SD card" for My Tracks.
[Operation]
Shown a track recording ready display, after the SmartMyTrack launched. Recording starts by "Round-shaped button" with long-push operation. Already a recording has started; it changes to following display automatically.
During a recording, you can select the display feature SPEED or PACE or TOTAL DISTANCE or ALTITUDE by swipe right(km/h,/km,KM,ALT m) / left(MPH,/mile,Mile,ALT ft). Recording stops by "Square-sheped button" with long-push operation. Marker set by "Pin button" with tapping.
Additionally you can change the screen power-save setting by "left-top mark" tapping. Note that if you set the power-save off, the SmartWatch battery exhaust early. Also if My Tracks access setting is disabled, it shown not allowed display after recording starts.
1. Track recording ready display.
Start a tracking : Long-push a "Round-shaped button".
Screen power save : Tap a "left-top mark".
2. Track recording display
Pause a tracking : Tap a "Pause button".
Stop a tracking : Long-push a "Pause button".
Mark a waypoint : Tap a "Pin button"
Screen power save : Tap a "left-top mark".
3. Track pausing display
Resume a tracking : Tap a "Pause button".
Stop a tracking : Long-push a "Pause button".
Screen power save : Tap a "left-top mark".
[Life cycle]
The track recording is still continuing after the SmartMyTracks exit. Also the recording is continuing after the SmartMyTracks re-start and you can control them. So you can use other application once the SmartMyTracks exit.
If you have any question, please contact below address.
[Tested terminal with "SONY SmartWatch"]
Sony Ericsson Xperia ray SO-03C
Smart Connect extension for SmartWatch 2
LiveWare extension for SmartWatch 2
LiveWare™ extension for SmartWatch
LiveWare extension for SmartWatch
2013.11.11 ver1.06
-Support My Tracks version 2.0.5
-Fixed button are overlapped in Track recording display.
-Support ALTITUDE display
Swipe right direction SPEED(km/h)→PACE(min'sec"/km)→DISTANCE(km)→ALTITUDE(m)
Swipe left direction SPEED(MPH)→PACE(min'sec"/mile)→DISTANCE(mile)→ALTITUDE(ft)
Checked by My Tracks version 2.0.5
Download